White Marble Cladding - Ceiling Panel 8mm x 250mm x 2700mm

Cladding White Marble PVC Wall and Ceiling Panel

Bring the timeless elegance of marble into your bathroom, shower room, kitchen, or conservatory without the cost or complexity of natural stone. The White Marble panel features a striking sand marble finish with fine veining on a bright white gloss background, creating a spa-like atmosphere that is fully waterproof and virtually maintenance free. Tongue and groove fitting means no tiling, no grouting, and no specialist trades required.

Key Features

• Sand marble finish with white gloss background, ideal for walls and ceilings
• 100% waterproof PVC core
• Class 1 fire rated, suitable for commercial and domestic use
• Tongue and groove fitting for a seamless, flush finish
• No tiling, grouting, or specialist trades required
• Non-porous, hygienic, and mould resistant
• Excellent insulation and sound proofing
• Virtually maintenance free, easy wipe-clean surface
• Light and easy to handle
• 10-year guarantee

Dimensions

• Panel thickness: 8mm
• Panel width: 250mm
• Panel length: 2700mm
• Coverage per panel: 0.675 sqm

Fixing Methods

Panels can be fixed directly to a flat, dry wall using shower panel adhesive, or mounted onto a wooden batten frame. When fixing to wooden battens, use staples, panel pins, nails, or screws through the backplate fixing tongue. Strap battens every 30 to 40cm in the opposite direction to the panel assembly. When fixing to ceilings, always fix to a wooden batten frame and do not use adhesive as the sole fixing method.

Installation Notes

• Start with your chosen end moulding (end cap U, internal, external, or scoial)
• Insert the tongue side of the first panel into the moulding
• Continue inserting each subsequent panel tongue into the groove of the previous panel
• Use PVC mouldings to finish all corners and ends
• When using decorative clip-in silver mouldings, clip into the groove before inserting the second panel
• When using H joint mouldings, insert the H joint before fixing the first panel backplate, then trim the panel tongue on both sides before inserting
• Seal all panel joints, profiles, and ends in wet areas with decorative PVC silicone sealant

Cutting

• Precision handsaw: cut with the decorative face upwards
• Electric saw: cut with the decorative face downwards

Maintenance

• Clean with a mild non-abrasive cleaner containing an anti-bacterial agent, such as Shower Panel Spray Cleaner
• Do not use abrasive cleaners or bleach
• Do not expose to direct sunlight or temperatures above 60 degrees Celsius

Accessories Available

Complete your installation with matching 8mm trims available in silver and white finishes:

• End caps (sold separately)
• Covings (sold separately)
• Internal corners (sold separately)
• External corners (sold separately)

Images are for illustrative purposes only.